Skyline Lite DVR – HDD Installation Guide

CCTV DVR How To & Troublshooting 0 Comments

Skyline Lite DVR – HDD Installation Guide

Step 1

Remove all retaining screws from the DVR cover – there should be 5 in total.

IMG_0086

Step 2

Carefully remove the top cover.

IMG_0087

Step 3

Connect the power and SATA cable to the drive. You will notice on the underside of the drive there are 4 screw holes which will align with the 4 holes in the base of the DVR as circled below.

IMG_0089

Step 4

Place the HDD as shown below so that the holes align.

IMG_0091

Step 5

Holding the HDD in place flip the DVR and HDD together and secure the HDD using the screws as shown below.

IMG_0090

Leave a Reply

Your email address will not be published. Required fields are marked *